Top Camera Cutting laser

Flexible material cutting solution targeted the problem of high injection rate caused by deformation of products.

Adopt DSP motion control technique, with continuous, smooth, economic cutting path, and curves optimization function, improve working efficiency significantly.

Exhausting system beneath cutting platform, the negative pressure is formed to make the material to be processed fixed stably on the platform; Air blowing system by the side of laser cutting head, moves at the same time, to ensure the smoke and dust generated during cutting are blown away. And ultimately to ensure the accuracy and surface cleanness of material.

Conventional manual cutting is able to cut about 600 pairs in one working day, 10 hours of working time; This machinery is able to cut 1,000–1,600 pairs in the same time, improve greatly working efficiency, and reduce basic manufacture cost.

With projector, to cut material into different sizes, not need to change films or papers on platform, adjustable by software. Much more economical without long term cost of film and paper.

Category:

Description

In way of projecting, the most accurate and most intuitive positioning can be realized for patterns. The color of projection can be changed according to the color of the material, makes the work easier and quicker, improves production efficiency.

Flexible material cutting solution targeted the problem of high injection rate caused by deformation of products.

Adopt DSP motion control technique, with continuous, smooth, economic cutting path, and curves optimization function, improve working efficiency significantly.

Exhausting system beneath cutting platform, the negative pressure is formed to make the material to be processed fixed stably on the platform; Air blowing system by the side of laser cutting head, moves at the same time, to ensure the smoke and dust generated during cutting are blown away. And ultimately to ensure the accuracy and surface cleanness of material.

Conventional manual cutting is able to cut about 600 pairs in one working day, 10 hours of working time; This machinery is able to cut 1,000–1,600 pairs in the same time, improve greatly working efficiency, and reduce basic manufacture cost.

With projector, to cut material into different sizes, not need to change films or papers on platform, adjustable by software. Much more economical without long term cost of film and paper.

Applicable industries: 3D Flyknit, 4D Flyknit, printed uppers of tennis, 3D handiwork

 يمكن تحديد الوضع  بدقة و يمكن تغيير لون الإسقاط وفقا للون من المواد مما  يجعل العمل أسهل وأسرع ، ويحسن كفاءة الإنتاج. كما تعتمد على  تقنية التحكم في الحركة DSP ، مع مسار القطع الاقتصادي المستمر ، على نحو سلس ،

ينتقل نظام تبريد  الهواء جانب رأس القطع بالليزر ، في نفس الوقت ، لضمان أن الدخان والغبار المتولد أثناء القطع يتم تفويره. وفي النهاية لضمان دقة ونظافة سطح المواد.

القطع اليدوي التقليدي قادر على قطع حوالي 600 زوج في يوم عمل واحد ، 10 ساعات من وقت العمل ؛ هذه الماكينة قادرة على قطع 1000-1600 زوج في نفس الوقت ، بتحسين كفاءة العمل بشكل كبير ، وخفض تكلفة التصنيع الأساسية. مع جهاز العرض ، لخفض المواد إلى أحجام مختلفة ، لا تحتاج إلى تغيير الأفلام أو الأوراق على المنصة ، قابلة للتعديل بواسطة البرامج. أكثر اقتصادا

Laser Power 80W / 100W/130W /150W
Cooling System Constant temperature AC chiller
Floor Space MAX 2500mm*3000mm
Format Supported AI\BMP\PLT\DXF\DST
Motion System Offline servo motor control system, LCD screen
Noise <65 Db (Excluding exhauster)
Operating Table Height 850mm
Optional Automatic feeding system, 200W CO2 RF laser tube

 

Laser Power 80W / 100W/130W /150W
Cooling System Constant temperature AC chiller
Floor Space MAX 2500  mm*3000 mm
Format Supported AI\BMP\PLT\DXF\DST
Motion System Offline servo motor control system, LCD screen
Noise <65 Db (Excluding exhauster)
Operating Table Height 850 mm
Optional Automatic feeding system, 200W CO2 RF laser tube
Positioning Accuracy ±0.1mm
Power Supply Requirements AC220V±5%   50Hz 3phase
Standard Collocation 375W*2 sets of bottom exhaust fans, 1 camera
Total Power <2.5KW (Excluding exhauster)
Working Area 1,000mm*800mm/1,300mm*1,000mm/1,600mm*1,000mm
Working Speed 300-600 mm/s
Working Table Conveyor/Honey comb platform

 

 

رابط الفيديو

https://youtu.be/nAb1KsZWLhs

 

Reviews

There are no reviews yet.

Be the first to review “Top Camera Cutting laser”

Your email address will not be published. Required fields are marked *